AutoCAD 3D Modeling Tutorial #4: Extrude vs. Revolve

In this video tutorial I will take you through each step to create a 3D model of the part shown in AutoCAD using two methods. First I show you how to create it with multiple extrusions. Then I show you how to create it using the Revolve command. If you would like to try this

Autodesk Fusion 360 Part Modeling Tutorial #4: Extrude vs. Revolve

In this video tutorial I will take you through each step to create a 3D model of the part shown in Autodesk Fusion 360 using two methods. First I show you how to create it with multiple extrusions. Then I show you how to create it using the Revolve command. If you would like to

Autodesk Inventor Part Modeling Tutorial #4: Extrude vs. Revolve

In this video tutorial I will take you through each step to create a 3D model of the part shown in Autodesk Inventor using two methods. First I show you how to create it with multiple extrusions. Then I show you how to create it using the Revolve command. If you would like to try

Autodesk AutoCAD 3D Modeling Tutorial #3

In this video tutorial, I take you through the creation of another 3D solid part in AutoCAD. I use the Press/Pull command in this one to create the solid shapes, instead of the Extrude command. Press/Pull works faster because you can apply it to several shapes at once, and it will cut holes automatically instead

Autodesk Fusion 360 Part Modeling Tutorial #3

In this video tutorial, I walk you through the creation of the part shown below using Autodesk Fusion 360. The features used in this tutorial include extrusions, holes, chamfers, and mirror. The video uses one of many workflows that would result in the same part. The detail drawing is available below in case you would

Autodesk Inventor Part Modeling Tutorial #3

In this video tutorial I will take you through each step to create a 3D model of the part shown in Autodesk Inventor. The following tools are used in this tutorial: Extrude, Hole, Project Geometry, Tangent constraints, Colinear constraints, Chamfer, and Mirror. Each sketch is fully dimensioned and constrained before creating the features. The detail

Autodesk AutoCAD 3D Modeling Tutorial #2

In this video tutorial, I take you through the creation of another 3D solid part in AutoCAD. You will learn to sketch each shape, join them into a polyline, then extrude them into solid shapes. Along the way you will learn about rotating the UCS. Finally, you will use the Union and Subtract commands to

Autodesk Fusion 360 Part Modeling Tutorial #2

In this video tutorial, I walk you through the creation of the part shown below using Autodesk Fusion 360. The features used in this tutorial include extrusions, holes, chamfers, and fillets. The video uses one of many workflows that would result in the same part. The detail drawing of the part is available as a

Autodesk Inventor Part Modeling Tutorial #2

In this video tutorial I will take you through each step to create a 3D model of the part shown in Autodesk Inventor. The following tools are used in this tutorial: Extrude, Fillet, Hole, and Chamfer. Each sketch is fully dimensioned and constrained before creating the features. The detail drawing for this part can be

Creo Parametric Modeling Tutorial #1

After posting some tutorials for Inventor and Fusion 360, I had some requests for Creo videos, so here you go! In this video tutorial, I walk you through the creation of the part shown below using Creo Parametric. The features used in this tutorial include extrusions and rounds. The video uses one of many workflows