In this video tutorial, I take you through the creation of another 3D solid part in AutoCAD. I use the Press/Pull command in this one to create the solid shapes, instead of the Extrude command. Press/Pull works faster because you can apply it to several shapes at once, and it will cut holes automatically insteadContinue reading “Autodesk AutoCAD 3D Modeling Tutorial #3”
Tag Archives: Chamfer
Autodesk Fusion 360 Part Modeling Tutorial #3
In this video tutorial, I walk you through the creation of the part shown below using Autodesk Fusion 360. The features used in this tutorial include extrusions, holes, chamfers, and mirror. The video uses one of many workflows that would result in the same part. The detail drawing is available below in case you wouldContinue reading “Autodesk Fusion 360 Part Modeling Tutorial #3”
Autodesk Inventor Part Modeling Tutorial #3
In this video tutorial I will take you through each step to create a 3D model of the part shown in Autodesk Inventor. The following tools are used in this tutorial: Extrude, Hole, Project Geometry, Tangent constraints, Colinear constraints, Chamfer, and Mirror. Each sketch is fully dimensioned and constrained before creating the features. The detailContinue reading “Autodesk Inventor Part Modeling Tutorial #3”
Autodesk AutoCAD 3D Modeling Tutorial #2
In this video tutorial, I take you through the creation of another 3D solid part in AutoCAD. You will learn to sketch each shape, join them into a polyline, then extrude them into solid shapes. Along the way you will learn about rotating the UCS. Finally, you will use the Union and Subtract commands toContinue reading “Autodesk AutoCAD 3D Modeling Tutorial #2”
Autodesk Fusion 360 Part Modeling Tutorial #2
In this video tutorial, I walk you through the creation of the part shown below using Autodesk Fusion 360. The features used in this tutorial include extrusions, holes, chamfers, and fillets. The video uses one of many workflows that would result in the same part. The detail drawing of the part is available as aContinue reading “Autodesk Fusion 360 Part Modeling Tutorial #2”
Autodesk Inventor Part Modeling Tutorial #2
In this video tutorial I will take you through each step to create a 3D model of the part shown in Autodesk Inventor. The following tools are used in this tutorial: Extrude, Fillet, Hole, and Chamfer. Each sketch is fully dimensioned and constrained before creating the features. The detail drawing for this part can beContinue reading “Autodesk Inventor Part Modeling Tutorial #2”
Between CAD Classes 